FuelTech FT250 Engine Management EFI w/ Harness $659

FuelTech 250

FuelTech 250

Free Shipping in 48 US!

– 16×2 Characters OLED Display
– VW Hall effect distributor ignition control
– 1 ignition output to control single coil and distributor system
– 18 channel internal datalogger (FuelTech USB-CAN Converter needed – sold separately)
– Idle speed control by timing or by solenoid
– Plug and Play connection to Racepak IQ3 Dashboard (Using integrated CAN port)
– Built-in MAP/MAF Voltage Clamper – See more at: http://www.fueltech.net/ft250-efi-prod-50.html#sthash.8epThPGx.dpuf
– Piston engine compatible (1 to 12cyl)
– Ignition and Fuel mapping directly on the ECU or through PC (Software FuelTech ECU Manager) *
– 8 input channels (IAT, ECT, Oil and Fuel pressure, O2 Sensor, TPS, Two-Step and RPM– not all sensors available at the same time)
– 2 injectors output that control up to 12 high impedance injectors
– 4 Auxiliary Outputs (fuel pump, fan, variable camshaft, etc.)
– Built-in MAP Sensor (87 psi)
– 5 Internal memory files
– Boost Control by RPM through N75 valve
– Progressive nitrous injection (wet/dry)
– Password protection
– Map backups on PC *
– Firmware update over the internet *
– Engine protection through 10 configurable alerts
– Time based rev limiter
– 10 or 20ft wire harness
– Dimensions: 140mm x 80mm x 30mm – See more at: http://www.fueltech.net/ft250-efi-prod-50.html#sthash.8epThPGx.dpuf
Bookmark the permalink.

Comments are closed.